Gefran is pleased to offer the following quote for the ADL100/200 Dedicated Elevator Inverter.
Magnetek - HPV 600 AC Elevator Drive
The HPV 600 is open-loop/closed-loop switchable. Its superior closed-loop control offers the same closed-loop performance features as the tried and true HPV 900, but...
Magnetek - HPV 900 AC Elevator Drive
The HPV 900 is the only commercially provided AC Drive designed from the ground up as an Elevator Drive. It employs the latest and best technology available to...
KEB Combivert F5 (TTL Feedback) Frequency Inverters
KEB COMBIVERT F5 provides different levels of power ranges that can be precisely tailored for the application. Identical operation, handling and tools optimize the...
Mitsubishi - Inverter FR-A700-NA , VFD
The FR-A700 frequency inverters combine innovative functions and reliable technology with maximum power, economy and flexibility. The FR-A700 is particularly well...
IP8300-Plus
The IP8300-Plus uses a hall effect sensor in conjunction with a magnetic target - very much the same as a mechanical magnetic switch works with a target or vane.
Electronic Stepper
Replacement Stepper for:
Armor, Curtis, General, Haughton, Otis, Payne, Seaburg, Turnbull, Westinghouse and other steppers.
Magnetic Button Replacement
This card is used to change from the old type magnetic button car station, as were used by Otis and Westinghouse, to the new light-up type button car station.
Current Sense Relay
Current Sense Relay For Otis Touch-Tube Circuits
This board was originally designed to replace the unavailable Ward Leonard Current Sensitive Relay that was...
Otis Touch Button Replacement
The 2040 module can be used to replace the existing touch buttons in the elevator cab or the hallway.
Otis Touch Button Plus Replacement
Redundant Safety Board2
The Redundant Safety Board is a microprocessor control monitoring system to independently check several critical safety issues as required by code.
Remote Monitoring Board
REMS Board
Serial IP Board
Redundant Speed Module
The Redundant Safety Board is a microprocessor control monitoring system to independently check several critical safety issues as required by code.
Safety Relay Board
Access Gripper Board (Rope Gripper)
Fuses Board
Switch Board
Door Board (OCNUDTSB)
IC693MDL240, 120 V Input, GE Fanuc 90-30
The 120 volt AC Input module for the Series 90-30 Programmable Logic Controller provides 16 input points with one common power input terminal. The input circuits are...
IC693MDL940, Output Relay, GE Fanuc 90-30
The 2 Amp Relay Output module for the Series 90-30 Programmable Logic Controller provides 16 normally-open relay circuits for controlling output loads provided by the...
IC693PWR321, Power Supply, GE Fanuc 90-30
Standard Power Supply, 120/240 VAC or 125 VDC Input
Revision Number: IC693PWR321Z
IC693CPU313, 05 Slot CPU Chassis, GE Fanuc 90-30
Embedded CPU Baseplates 5 slot
Revision Number: IC693CPU313X
IC693CPU323, 10 Slot CPU Chassis, GE Fanuc 90-30
Embedded CPU Baseplates 10 slot
Revision Number: IC693CPU323X
IC693ACC301, PLC Battery
PLC Battery
This is a 1 cell lithium battery designed to work in Cutler Hammer GE Fanuc A06B, 90-20, 90-30, PCM, IC963 series programmable logic controllers and...
